Alagonia

Pump for vacuum or pressure

Stand-alone CE certified and EMC compliant pump. Pressure or vacuum source gas supply for drive of Air-Operated-Diaphragm-Positive-Displacement (AODPD) Single-Use-Pump's (SUP) via Drive Unit's like Atropos, Clotho, and Lachesis

Product, model name

Alagonia-8

Alagonia-12

Purpose

Vacuum or pressure source

Vacuum source

Supply gas pressure, max

1,1 bar atmospheric

 

Rated pressure capacity, l/min/ 1,0 bar

8

 

Supply vacuum pressure, higher than

<0,1 bar absolute

<0,1 bar absolute

Rated vacuum capacity, l/min

4

12

Noise level, dBa

70

45

Power supply, 50-60 Hz 230 VAC - 0,4 amp 230 VAC - 0,3 amp

Hephaestus cabinet size

U2

U3

Weight, kilo

6,5

 6,5

Design

Alagonia-8 hold one (www.electroad.es) model EVO10-P1 dual rubber diaphragm pump driven by a fixed RPM asynchronous motor for very long life time. For temperature control one constant operating Sunon 70 m3/hour MagLev bearing axial ventilator is integrated inside cabinet. Alagonia can supply either pressure or vacuum. Not both pressure and vacuum at the same time - from one Alagonia!

A suitable setup is based on shop air and a "tower" which consist of 1 x Atropos, 1 x Alagonia, and 1 x Sarpedon. Such "tower" can drive numerous combined Euterpe SUP cell's. 

 Hephaestus Stainless Steel cabinet U2 housing the Alagonia pump. We recommend one Sarpedon reservoir combined with two Alagonia stabilizing the pressure and vacuum. At the most right a tower where blue hoses interconnect the three units. Gauges on Sarpedon help controlling pressures. The brass pressure regulator visible at lower right corner on Sarpedon regulate for constant 1 bar pressure.

 

Alagonia pump cannot start-up against pressure! (no pressure pumps can!) There must be low pressure or atmospheric pressure on both sides of the cabinet one-touch fittings before start-up. If Alagonia under start-up conditions do not immediately return to normal RPM overheating and damage will occur. If Alagonia is not pressure released before start-up overheating and damage will occur.

In & Out

  • Standard IEC supply socket with build-in fuse, 1 x 230 VAC, 50-60 Hz (1 x 110 VAC, 50-60 Hz)
  • 8 mm hose connection for pressure via one-touch couplings
  • 8 mm hose connection for vacuum via one-touch couplings

Communication

  • none